Jump to content
IndyGuy4KI

Orion Construction Photos

Recommended Posts

Just so you know the confidence of B&M, they had an interview while they were constructing Nemesis at Alton Towers, and they were asked if there was a possibility the ride would stall and B&M said straightforward that their rides don't stall.

Granted, that has proven false when you add wind to the equation (most B&M valley's have been due to wind), but these guys know what they're doing. 

Unfortunately, I can't source it as its lost in the depths of the internet, but its a thing that happened. 

  • Like 2

Share this post


Link to post
Share on other sites
6 hours ago, Skibum said:


While I wish that that Orion construction camera was still running, I guess that it will be rather boring from this point forward.  Regarding testing, I would think that they have to:

1.  Install the lift hill chain and motor.

2.  Finish installing the brake systems, including any trims.

3.  Get the station up and running, including drive tires or whatever will be needed to propel the stopped trains.

4.  Do a proper clearance run with one car and the projected clearance envelope.

5.  Landscaping, finish the queue, and who knows what else.

Not being privy to what all has occurred, I'm not sure where they are on the above steps.

lift motor was installed as lift hill was constructed, they don’t do clearance testing with a car, they have a cutout that they place at all areas that could come in contact. Drive tires were pre-attached to the VFD drive motors on the individual sections and delivered that way. 

  • Like 6

Share this post


Link to post
Share on other sites

I don’t know how to read blueprints however we’ve only seen one trim break installed, I don’t think there’s another trim break going onto this ride.

  • Like 3

Share this post


Link to post
Share on other sites
7 hours ago, Benjamin22 said:

I don’t know how to read blueprints however we’ve only seen one trim break installed, I don’t think there’s another trim break going onto this ride.

I meant that there is two spots where it says there will be trim brakes, I didn’t mean that there will be two trim brakes

Share this post


Link to post
Share on other sites
11 hours ago, pkiridesmaint said:

Drive tires were pre-attached to the VFD drive motors on the individual sections and delivered that way. 

What are VFD drive motors?

Share this post


Link to post
Share on other sites
7 minutes ago, KIguy2004 said:

What are VFD drive motors?

Best way I can explain it is they are kinda like the systems on Flying Ace Areial Chase's lift hill, only they are used in the station/ before the lift hill/ transfer track area(s).

  • Thanks 1

Share this post


Link to post
Share on other sites
1 hour ago, Klabergian Empire said:

Best way I can explain it is they are kinda like the systems on Flying Ace Areial Chase's lift hill, only they are used in the station/ before the lift hill/ transfer track area(s).

VFD’s are used more than what you describe, VFD is a Variable frequency drive, which means in dumbed down terms the motor can be sped up and down by adjusting the voltage AND frequency while maintains the same level of torque. almost all coasters at Kings Island have a variable speed motor on their lift. Ever notice the change in speed as you’re ascending? On The Bat, The Beast, racer, Mystic Timbers?  That is because the Programmable logic controller is controlling the lift motor and varying the speed depending on the location of the other trains in the blocks. B&M uses VFD motors in the block brakes and station because they can slow the motor way down and accurately park the train in the same position every time. Older coasters rely solely on their brakes to stop a train in the correct position which never produces consistent results

  • Like 7

Share this post


Link to post
Share on other sites

Anything happening with Orion? I wonder if the trains will each be a different color?

  • Like 3

Share this post


Link to post
Share on other sites
15 minutes ago, KIguy2004 said:

Anything happening with Orion? I wonder if the trains will each be a different color?

I'm hoping something like blue black and orange. 

  • Like 5

Share this post


Link to post
Share on other sites

I split out the conversation about addressing noise complaints into this thread:

 

  • Like 2

Share this post


Link to post
Share on other sites

I am so excited! I love the colors; it looks like a B&M Millennium Force (ok, I know it's not, but still)! This thing is going to be amazing!!!

Can't wait for testing!!!

Also, this seems relevant:

:lol:

  • Like 4
  • Haha 3

Share this post


Link to post
Share on other sites
7 minutes ago, MDMC01 said:

I am so excited! I love the colors; it looks like a B&M Millennium Force (ok, I know it's not, but still)! This thing is going to be amazing!!!

Can't wait for testing!!!

Also, this seems relevant:

:lol:

Yeah, im wondering if they made the the lift hill supports different colors like Diamondback.

Share this post


Link to post
Share on other sites
3 minutes ago, collin.klopfstein said:

You'll notice it just wait...

rdhtjttjd.PNG

This goose looks like it's very amazed by Orion :lol:

021620200915_l.jpg

  • Like 4
  • Haha 10

Share this post


Link to post
Share on other sites

Will the angle of descent help or hinder the experience? The only thing that comes to mind with with was that for decades Vortex had the best drop in the park, and that was not angles in a particularly vertical manner. 

  • Like 7

Share this post


Link to post
Share on other sites
2 hours ago, BoddaH1994 said:

Will the angle of descent help or hinder the experience? The only thing that comes to mind with with was that for decades Vortex had the best drop in the park, and that was not angles in a particularly vertical manner. 

Personally, I don’t believe so. If you’ve been on the other B&M gigas, the steeper angle makes it feel like the drops just goes on forever! 

  • Like 3

Share this post


Link to post
Share on other sites
41 minutes ago, Gplez90 said:

Personally, I don’t believe so. If you’ve been on the other B&M gigas, the steeper angle makes it feel like the drops just goes on forever! 

Actually, I haven’t been, so this is good information! 

  • Like 2

Share this post


Link to post
Share on other sites
46 minutes ago, Gplez90 said:

Personally, I don’t believe so. If you’ve been on the other B&M gigas, the steeper angle makes it feel like the drops just goes on forever! 

I beg to differ.  I305's 85° drop is not very good while fury's 80° or so seems to last longer.  Don't know how this one will feel cause it's new from b&m.  Skyrush has an 85° drop and is one of the best in the world.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...