Jeorby Nanpa

Haunt 2024: I looked! Is the bag policy still in place? Like nothing bigger than a coin purse? I skipped Haunt 2023 for this reason and many will prob say good riddance I am non-threatening and just want a legit bag for my phone and wallet.

Maybe you can read between the lines. But as a guy... this bump is particularly hurtful in the most vulnerable spot. If that little divot in the track was fixed I wouldn't have to stand up against the bar strongly as possible.

Ouch! All the guys know about that "rough spot" I brace against the restraint full-blast.

Aha, thank you. I went to https://www.visitkingsisland.com/frequently-asked-questions and opened the + for Security Procedures and saw nothing.

They sure do sell bags bigger than this! I did go to Guest Services and ask to get a complaint form. She said "you can just talk to security." No, I'm not talking to a 21-year old you just hired. I said I wanted to write it down and she grabbed a random scrap of paper and a pen. I was angry at the time but that's pretty funny now.

The bag thing was a surprise. I keep up with KI and even their website doesn't have this Many walking back to their cars, probably some leaving.

I wish it was working too. It seems like a bit too much breaking. If my stuff broke 30 times I'd be removed from the project.

This thing has been down 8x while I'm visiting and 30x is a reasonable extrapolation. Someone dropped the ball on this. Sensors and PLC's are a pretty mature technology, in any weather and any situation. When the ride opened 40+ years ago, was it down 20% of the time? If I'm driving a car and it's broken 20% of the time, all the parts of it should be mature tech. And those which are new should "break" 1-3x during the testing phase.

Lots of fans here and I hope you can put up with me being a critic. It's for the good of all I'm at KI 2x a week since days started. I'd say 50% of the time Beast is down. We'd like to be safe... yes of course. From my limited attendance, I'd say Beast was down 30+ times since starting the daytime season. Here's some options to consider - the same thing broke 30x... sensors, wires, brakes, whatever. But same thing 30x - 30 different things have broken From an controls engineering standpoint, this is nuts. If it's the same thing over and over then it's a no-brainer to fix it. If it's different things breaking each time then why the heck didn't we figure this out two months ago. Would like to hear someone "make lemonade" out of these lemons. But IMO it's a bit unacceptable for a [former] main attraction to be this unreliable. Even if it's redundant systems disagreeing. Plz forgive my criticism but this isn't ho-hum oops stuff breaks it's all new

AHA! My pass is gold. I didn't realize there was another level below. That clears things up.

Did you get the email about new terms for the passholders? It's pseudo-legal stuff. But it appears that a pass won't be good for Haunt or Winterfest in the future?

I rode Beast a few times after 7PM on Tuesday 8/10/21. For a while, there's a maintenance dude at the valley after the first left turn. The place with the new lumber. He's looking at the trains go by at a place 20 feet further down from the repair. Hmmm. HMMMMMMM. Off topic, but if you want to see a track bend, watch it when a train descends the first hill on Diamondback. Quite a surprising flex. Yes yes yes metal bends and flexes. But still...

(went to Reddit thread) Is that even new? Is it valley after the very first left turn? I could swear that was already done. It doesn't look like more than 15'. Looks like supports sinking or shifting is pretty common.

Unfortunately KI keeps a lid on everything, a very tight lid! If you worked there, I'm sure there's threats against you commenting on downtime, etc. So we have more speculation. Let's look at the individual parts and more can be added 1) the track 1a) foundation or support structures 2) the shell of the cars and wheels 3) the brake fin of the cars (whatever it's called) 4) the latching system for the bars 5) the chain on either lift hill 6) the motor for either lift hill 6a) gearboxes for either lift hill 6b) compressed air systems 7) the humongous bearing/cog at the top of the lift hills (which has sensors to indicate off-center) 8) the brakes anywhere, midway or at the end or in the station 9) sensors or switches to indicate the location of trains 10) wiring for the controls or remote PLCs (putting several sensors into a single remote and connecting to the front) 11) whatever big PLC/computer operates the entire thing 11a) the buttons on the control panel, or the screens 12) hackers! 1, 1a can be fixed in days 2, 3, 4 just don't run all the trains, it doesn't affect them all at once 5 probably some spare chain links sitting around but not an entire chain 6) POSSIBLE... guessing the motor is 50-100hp and it could be a obsolete frame/mount 6a) POSSIBLE any gearbox may be obsolete and it failing could damage other things 6b) should be an easy fix 7) POSSIBLE would probably be custom made in a machine shop 8) spares for brakes, no 9) sensors are probably off-the shelf and easy to replace, if there's not already spares 10) can fix the wiring quickly, maybe if an animal ate them or whatever 11) POSSIBLE even if upgraded since 40 years ago, it's still going to be old and maybe tough to program 11a) just replace the buttons those are standard 12) no hackers on such an oldass system I am leaning towards 11, that the entire control system took a dump. If you guys know controls, A/B SLC 500 series is very very common and probably hasn't changed in 20 years. Same with programming the thing. Guys at my workplace can do this... it's very maintenance friendly. The program can't be that difficult but would be horrid to start from scratch.... really not any timing involved because everything happens in sequence including how much to trim the brakes or release cars into the next zone. WHEW wordwall. Comments?

Row 16 for me... interesting so many of us have a fave row. Pic: XVI If that first valley after the first left-turn is damaged, you'd throw a bit of lumber on it and be ready sooner? Still seems odd. Was gonna slip in a couple weeknights this week, but really it's for Beast at 9:05pm.