kblanken Posted November 24, 2012 Share Posted November 24, 2012 My question is, If they decided to keep SOB station for the Haunt instead of using it again for a new ride, would that old SOB station be in the way of a Future roller coaster? It depends on where this Future coaster is placed. There is room to make it not be in the way. 1 Quote Link to comment Share on other sites More sharing options...
Oldschool75 Posted November 24, 2012 Share Posted November 24, 2012 I say it may be time to lock this thread since the topic of it has come to pass. 1 Quote Link to comment Share on other sites More sharing options...
Shawn Meyer Posted November 26, 2012 Share Posted November 26, 2012 They're not completely done yet. We still have to talk about them tearing out the footers. Quote Link to comment Share on other sites More sharing options...
KI FANATIC 37 Posted November 26, 2012 Share Posted November 26, 2012 Im looking forward to the pictures that Don or Greg post of the site after everything is gone(hopefully they will), debris, footers, everything. That will be exciting! Quote Link to comment Share on other sites More sharing options...
savesonofbeastfb Posted November 26, 2012 Share Posted November 26, 2012 Also when they begin surveying the land in early 2013! Quote Link to comment Share on other sites More sharing options...
DaveWorldEmperor Posted November 26, 2012 Share Posted November 26, 2012 I want to see a view from the Eiffel Tower, The Action Zone, from back by Flight Deck, and especially from the front of the station. 2 Quote Link to comment Share on other sites More sharing options...
Oldschool75 Posted November 26, 2012 Share Posted November 26, 2012 I want to see a view from the Eiffel Tower, The Action Zone, from back by Flight Deck, and especially from the front of the station. Here is your view from the Eiffel Tower 4 Quote Link to comment Share on other sites More sharing options...
Outdoor Man Posted November 26, 2012 Share Posted November 26, 2012 I want to see a view from the Eiffel Tower, The Action Zone, from back by Flight Deck, and especially from the front of the station. Here is your view from the Eiffel Tower HOLY CRAP!, they DID build a new coaster. This one has a loop in it! And its wooden- and they said it couldn't be done. Suckers! 8 Quote Link to comment Share on other sites More sharing options...
faeriewench Posted November 26, 2012 Share Posted November 26, 2012 My pieces arrived today. I'm actually impressed with the plaque. Well done KI. 3 Quote Link to comment Share on other sites More sharing options...
dakota2112 Posted November 26, 2012 Share Posted November 26, 2012 Btw for anyone interested in cleaning their track piece, here's what I did and it worked great. Take a stout cloth (a shop rag, or anything better than a paper towel... maybe steel wool would be best), liberally moisten with WD-40, and scrub the surface of the track. If yours is like mine was, you'll remove a TON of surface rust. I had two do this procedure twice to get it cleaned up to where a clean rag came back mostly clean instead of mostly rusty. Then, apply a light drizzle of motor oil (or 3-in-1, etc) on the metal, work it onto the entire top surface of the track (by hand), and remove any excess with another clean stout cloth. Be careful not to dirty up the wood plaque itself in the process of all this by the way. My track piece is now rust-free, and my finger remains clean when I run it across the surface. And don't worry, it doesn't remove the wheel marks. Those are worn onto the surface. Leave a very light film of oil on the steel, and that should help delay new surface rust from forming. And lastly, for what it's worth, I noticed my track piece was either bent during SOB dismantling and/or souvenir processing, or else it has retained a slight curvature from the contour of the ride. The metal is definitely not flat, if you look at it on edge. (mine looks ever-so-slightly convex, so... I figure that if this shape is retained from the ride itself, then it was either approaching a hill, atop a hill, or starting down a hill ) Quote Link to comment Share on other sites More sharing options...
faeriewench Posted November 26, 2012 Share Posted November 26, 2012 Mine has a slight curvature too as well I noticed Quote Link to comment Share on other sites More sharing options...
standbyme Posted November 26, 2012 Share Posted November 26, 2012 My track piece is now rust-free... How about a picture...i'm torn whether to clean mine or not. 2 Quote Link to comment Share on other sites More sharing options...
Hank Posted November 26, 2012 Share Posted November 26, 2012 Mine has a slight curvature too as well I noticed See - it was curved from the beginning (it was supposed to be straight!). RCCA strikes again! 3 Quote Link to comment Share on other sites More sharing options...
KI-ORIG-EMP Posted November 26, 2012 Share Posted November 26, 2012 If you want it to retain some value, I would reconsider cleaning it. People that have antique firearms make this same mistake and clean it, thinking it would enhance its value. But when they have it appraised, the appraiser would tell them this is a huge mistake. The wear and tear shows it was well used for the purpose it was designed for. I think it would retain its value if left in its original condition. But then again, I could be wrong. Best bet would be to ask an expert if it would retain or not retain its value if cleaned. Quote Link to comment Share on other sites More sharing options...
standbyme Posted November 26, 2012 Share Posted November 26, 2012 ^Thanks for your opinion. I had thought of that, but I was not sure if the park ever cleaned the rust off of the tracks every year or so anyway...if so, a clean(er) track wouldn't matter. I never plan on selling it, so resale value would only become an issue to my heirs. Quote Link to comment Share on other sites More sharing options...
Shaggy Posted November 26, 2012 Share Posted November 26, 2012 "Patina." (Per Antiques Roadshow) ;-) 2 Quote Link to comment Share on other sites More sharing options...
Gordon Bombay Posted November 26, 2012 Share Posted November 26, 2012 I was not sure if the park ever cleaned the rust off of the tracks every year or so No need to. Send those trains around enough times with their steel wheels against the track and the cosmetic problem resolves itself. 2 Quote Link to comment Share on other sites More sharing options...
dakota2112 Posted November 26, 2012 Share Posted November 26, 2012 My track piece was so rusty when I got it that just by virtue of handling the plaque, rust powder and red fingerprints soon showed up on everything in the vicinity. I don't plan to use this thing for monetary gain, so for me it was a no-brainer... clean the thing . If I want to restore its rusty condition, I'll just set the metal piece outside for a couple years. (but that's a good point I guess... if you want to keep yours in truly "as-is" condition, then don't clean yours... just be careful to avoid rusty fingerprints!) 1 Quote Link to comment Share on other sites More sharing options...
faeriewench Posted November 26, 2012 Share Posted November 26, 2012 I can run my fingers across it and no issue with rust powder coming off^ ^Thanks for your opinion. I had thought of that, but I was not sure if the park ever cleaned the rust off of the tracks every year or so anyway...if so, a clean(er) track wouldn't matter. I never plan on selling it, so resale value would only become an issue to my heirs. I would make it known to my future heirs my park stuff are to be kept around! Quote Link to comment Share on other sites More sharing options...
Tanna Posted November 26, 2012 Share Posted November 26, 2012 I don't know if I'd clean it, either. You don't want to lose any authenticity or ride smell. Quote Link to comment Share on other sites More sharing options...
xXDrummerKiDXx Posted November 26, 2012 Share Posted November 26, 2012 They seem really cool. I just didn't have 100 bucks to spend D: 1 Quote Link to comment Share on other sites More sharing options...
standbyme Posted November 27, 2012 Share Posted November 27, 2012 I would make it known to my future heirs my park stuff are to be kept around! Two future signs that I have taken the last stop at Willoughby...I have stopped posting on here...and there's a selller with a ton of Kings Island memorabilia listings on eBay. 1 Quote Link to comment Share on other sites More sharing options...
Browntggrr Posted November 27, 2012 Share Posted November 27, 2012 I don't know if I'd clean it, either. You don't want to lose any authenticity or ride smell. As opposed to the normal rusted metal smell? 3 Quote Link to comment Share on other sites More sharing options...
Hendrick Posted November 27, 2012 Share Posted November 27, 2012 I would love to see someone's picture of the track after it's been clean. 1 Quote Link to comment Share on other sites More sharing options...
faeriewench Posted November 27, 2012 Share Posted November 27, 2012 I don't think I'll be cleaning mine 1 Quote Link to comment Share on other sites More sharing options...
dakota2112 Posted November 27, 2012 Share Posted November 27, 2012 I would love to see someone's picture of the track after it's been clean. It looks like clean roller coaster track instead of rusty roller coaster track. My track piece was almost uniformly rusted across the entire surface, with a very dark color, and the wheel marks were barely visible. That's quite different than other plaques I've seen where it's a very bright colored rust, with dark wheel marks clearly visible. Not sure why some are dark and others are lighter. But for me, it was more of a practical issue. I can't speak for anyone else, but... my better half would certainly not be happy with this fingerprint-making-machine hanging on the wall without it being cleaned first. Anyone who is in doubt can leave their track as-is and see how it goes. You can always clean it later if it gets to be a problem. Quote Link to comment Share on other sites More sharing options...
Creed Bratton Posted November 27, 2012 Share Posted November 27, 2012 http://www.lancastereaglegazette.com/videonetwork/1990841243001/Roller-coaster-crumbles-into-pieces This was on my local newspaper's site. USA Today picked up the story. I'm surprised we haven't heard anything about the brake run going down. Quote Link to comment Share on other sites More sharing options...
Gordon Bombay Posted November 27, 2012 Share Posted November 27, 2012 I would make it known to my future heirs my park stuff are to be kept around! Two future signs that I have taken the last stop at Willoughby...I have stopped posting on here...and there's a selller with a ton of Kings Island memorabilia listings on eBay. Given all the cool things you have, I think we need to have a fundraiser to buy you some property and a small building... get a KI museum started. 8 Quote Link to comment Share on other sites More sharing options...
Diamondbacker Posted November 28, 2012 Share Posted November 28, 2012 ^^Wouldn't they have to take apart the break run somewhat manually because of the walkways underneath? 1 Quote Link to comment Share on other sites More sharing options...
Creed Bratton Posted November 28, 2012 Share Posted November 28, 2012 I asked Don via twitter about the break run here's the conversation: C Hugh @chugh43@KingsIslandPR In the last video that you guys shared, the brake run of Son of Beast was still standing. When will that go down? 3h Kings Island @KingsIslandPR @chugh43 It is down. 2h C Hugh @chugh43 @KingsIslandPR awesome! Thanks! 7:39 PM - 27 Nov 12 · So the brake run is down. 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.