Jump to content

Cedar Point Poured Windseeker Foundation Friday, 01/14/2011


Recommended Posts

Cedar Point Amusement Park is set to prepare the concrete foundation for its newest ride, the 301-foot-tall WindSeeker swing ride.

Weather permitting tomorrow, Jan. 14, more than 1,600 tons of concrete will be poured to build the 30-story ride's foundation. The dimensions of the foundation are 60 feet by 60 feet by 6 feet deep and will require more than 800 cubic yards of concrete. Prior to the pour, more than 36 tons of steel rebar and 176 steel anchor bolts have been placed in position.

Overall, the total weight of the foundation will be more than 3.3 million pounds, or 1,650-plus tons of concrete and steel.

The Adena Corp. of Mansfield will build the foundation while Huron Cement of Huron will deliver the concrete. Cedar Point said the pour is scheduled to begin at approximately 7 a.m. and should be completed by 5 p.m. A fleet of 14 trucks is scheduled to make 80 continuous trips to the park to transport the concrete....

And Cedar Point will have not one but two webcams covering the process:

http://www.crainscle.../FREE/110119895

Link to comment
Share on other sites

Well, they can add admixtures to the concrete to allow pouring in cold conditions. And because of the soil conditions, you can guarantee that the foundation design is different than that of Kings Island`s foundation. Soil conditions is a big determining factor in designing foundations for rides, and structural engineers rely on soil cores to determine the soil bearing capacity to adequately size the foundation to support the proposed structures. And the soil conditions on a given site can change quite dramatically. One project that I`ve worked on in the office recently had such poor soil conditions, that they were having to do 42" concrete piers and a grade beam because the soil couldn`t support conventional construction.

Link to comment
Share on other sites

For those that were wondering why the capital expenditure was going to be higher at CP (can't find data, but remember the conversation), the foundation data helps answer that question.

- Kings Island: 45' across, 6' deep

- Cedar Point: 60' across, 6' deep

That's almost 80% more concrete and therefore likely rebar also at Cedar Point. That much concrete isn't cheap!

Link to comment
Share on other sites

For those that were wondering why the capital expenditure was going to be higher at CP (can't find data, but remember the conversation), the foundation data helps answer that question.

- Kings Island: 45' across, 6' deep

- Cedar Point: 60' across, 6' deep

That's almost 80% more concrete and therefore likely rebar also at Cedar Point. That much concrete isn't cheap!

Yes, concrete isn't when that much is needed, which makes me think does things like this (WS and such) need a special formulation of concrete?

Link to comment
Share on other sites

Well, I can guarantee you that installing all those pacers in Ciney Mall is not a cheap endeavor either. And a little bit more concrete in the grand scheme of things does not add that much to the total cost.

Yes, there are different strength concrete mixes. They are measured in psi (pounds per square inch). The higher the number, the stronger the mix. The strength of concrete is usually specified by the structural engineer based on the loads and the soil conditions.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...