TheCrypt Posted June 8, 2013 Share Posted June 8, 2013 That is why I am hoping for a intamin giga. All that jackhammering shruggs off speed. Speed is the less resistance.Why do you think Millennium Force goes so slow at the end? The turns and hills in the course shave off speed.That's my point, I don't want jackhammering to shrugg off more speed.Millennium Force jackhammers? I thought it was smooth as glass. 1 Link to comment Share on other sites More sharing options...
SonofBaconator Posted June 8, 2013 Share Posted June 8, 2013 ^^^^Those type of of coasters tend to do that. That's why Diamondback has an abundance of airtime Link to comment Share on other sites More sharing options...
Big Sexy Posted June 8, 2013 Share Posted June 8, 2013 That is why I am hoping for a intamin giga. All that jackhammering shruggs off speed. Speed is the less resistance.Why do you think Millennium Force goes so slow at the end? The turns and hills in the course shave off speed.That's my point, I don't want jackhammering to shrugg off more speed.Millennium Force jackhammers? I thought it was smooth as glass. Umm, I have been referring to Diamondback jackhammering... Link to comment Share on other sites More sharing options...
TheCrypt Posted June 8, 2013 Share Posted June 8, 2013 And you responded to my comment about Millennium Force. What's your point? Link to comment Share on other sites More sharing options...
Beast1979 Posted June 8, 2013 Share Posted June 8, 2013 Neither Millennium Force nor Diamondback are rough at all. Diamondback shuffles a bit after the turnaround, but it does next to nothing to reduce its speed. The trim and midcourse directly afterwards do that job quite nicely. In terms of B&M versus Intamin for roughness/smoothness, they're usually about equal. As for all of that speed and height make for better coasters nonsense that was going on a few pages earlier...it's like none of you guys have ever ridden Maverick or a GCI before. 10 Link to comment Share on other sites More sharing options...
Adventuro Posted June 8, 2013 Share Posted June 8, 2013 If a roller coaster is rough or not is solely opinion- based if you think about it. Link to comment Share on other sites More sharing options...
Big Sexy Posted June 8, 2013 Share Posted June 8, 2013 What kind of steel is clermont steel putting out? I hear newer b&ms all jackhammer. I have ridden raging bull, nitro, appolo chariot, goliath sfog hypers and none of those jackhammer. Link to comment Share on other sites More sharing options...
dumakey1212 Posted June 8, 2013 Share Posted June 8, 2013 If a roller coaster is rough or not is solely opinion- based if you think about it. How so? Link to comment Share on other sites More sharing options...
UnrealNightmare Posted June 8, 2013 Share Posted June 8, 2013 Hold that thought I'm going to grab some popcorn this is getting good. 3 Link to comment Share on other sites More sharing options...
Big Sexy Posted June 8, 2013 Share Posted June 8, 2013 http://www.intaminworldwide.com/amusement/RollerCoasters/MotorBike+Coaster/tabid/138/ProductNumber/MotorBike+Coaster/language/de-DE/Default.aspx Imagine this as a giga... Link to comment Share on other sites More sharing options...
McSalsa Posted June 8, 2013 Share Posted June 8, 2013 If a roller coaster is rough or not is solely opinion- based if you think about it. Kind of. There are also different seat choices (some seats are smoother riding than others), current weather conditions, etc etc. And some people are more bothered by different types of roughness, there is the head-banging variety, the wooden "Dinn" shuffle, the classic "Jackhammer", the sharp turning of older steel coasters... I have had both nearly "B&M" smooth and very painful, rough rides on Flight of Fear at Kings Island alone (never rode it with OTSRs), as an example of how a ride can be smooth or rough, depending on various conditions. Another example would be The Voyage @ Holiday World...it was OK in 2010, but my rides on it one year later we very rough. It's probably very different now as Holiday World went and re-tracked it in 2012. As for the "rides must be big and tall and fast to be good" theory...Steel Dragon 2000 vs. Expedition GeForce. Based soley on height and speed, GeForce should lose, as it is a "pewny" 174 feet tall (not even a hypercoaster!). But it was voted the best steel coaster in the world in the 2012 Mitch Hawker poll, also being favored over such giants as Millennium Force, I305, Leviathan, Top Thrill Dragster, and Kingda Ka as well to win that honor. It has never fallen out of the Top 3. And when you talk wooden coasters, most of the best ones are actually pretty small, while nearly every huge non-prefab wooden coaster ever built has run into serious issues...even Voyage @ Holiday World is starting to have problems, hence why Timberliners were ever even suggested for it. 1 Link to comment Share on other sites More sharing options...
Adventuro Posted June 8, 2013 Share Posted June 8, 2013 If a roller coaster is rough or not is solely opinion- based if you think about it.How so? Because what some people think is rough may not be rough to others. Like I think Vortex is rough, but I've actually heard some people say it's smooth. Link to comment Share on other sites More sharing options...
Diamondback96 Posted June 8, 2013 Share Posted June 8, 2013 I think we can all agree on one thing though: Son of Beast was very rough. Oops, I shouldn't have mentioned that... 5 Link to comment Share on other sites More sharing options...
AintNutinElse2Do Posted June 8, 2013 Share Posted June 8, 2013 I think the jack hammering or rattle on Diamondback has to do with the elongated trains more than anything.... then again shouldn't a Diamondback rattle? 7 Link to comment Share on other sites More sharing options...
SonofBaconator Posted June 8, 2013 Share Posted June 8, 2013 then again shouldn't a Diamondback rattle? Apparently, some people would beg to differ.. 1 Link to comment Share on other sites More sharing options...
secondson Posted June 8, 2013 Share Posted June 8, 2013 .... then again shouldn't a Diamondback rattle? That's an interesting point. Is it possible they designed Diamondback to deliberately jackhammer as part of the ride experience? 1 Link to comment Share on other sites More sharing options...
TheCrypt Posted June 8, 2013 Share Posted June 8, 2013 I doubt it. Link to comment Share on other sites More sharing options...
AintNutinElse2Do Posted June 8, 2013 Share Posted June 8, 2013 .... then again shouldn't a Diamondback rattle? That's an interesting point. Is it possible they designed Diamondback to deliberately jackhammer as part of the ride experience? Oh no please don't actually think that. Though I guess it could also mimic the rumble of a Nascar and the growl of a Behemoth. I do doubt it was intentional though but hey add a little theme and it's like now with rumble effects. Back on topic though, what I wonder is with the triangle footers which signify generally a meeting of multiple supports. Which generally occurs on tighter radii but not generally in low force areas. Why so close to the presumed station area? Not trying to be an expert just trying to decode. 1 Link to comment Share on other sites More sharing options...
SonofBaconator Posted June 8, 2013 Share Posted June 8, 2013 Maybe we just need a decoder to solve this mystery. Remember kids, drink your ovaltine. 6 Link to comment Share on other sites More sharing options...
LongliveKingsCobra Posted June 8, 2013 Share Posted June 8, 2013 "son of a *****" Best part of the movie. Oh look I'm a double Platinum member, when did that happen? 3 Link to comment Share on other sites More sharing options...
corn4ahead Posted June 8, 2013 Share Posted June 8, 2013 I just rode Intimidator at Carowinds. I noticed that there were multiple triangular supports. I know that this has been mentioned before but there are at least 5 or so and most of them are for a single support, not multiple ones like the 2014 construction is showing. Curious.... Link to comment Share on other sites More sharing options...
DBInternational Posted June 8, 2013 Share Posted June 8, 2013 "son of a *****" Best part of the movie. Oh look I'm a double Platinum member, when did that happen? does ***** mean beast? 2 Link to comment Share on other sites More sharing options...
SonofBaconator Posted June 8, 2013 Share Posted June 8, 2013 "son of a *****" Were you going to say 'SON OF A BACONATOR!' ? 1 Link to comment Share on other sites More sharing options...
CedarPointer Posted June 8, 2013 Share Posted June 8, 2013 .... then again shouldn't a Diamondback rattle? That's an interesting point. Is it possible they designed Diamondback to deliberately jackhammer as part of the ride experience? Oh no please don't actually think that. Though I guess it could also mimic the rumble of a Nascar and the growl of a Behemoth. I do doubt it was intentional though but hey add a little theme and it's like now with rumble effects. Back on topic though, what I wonder is with the triangle footers which signify generally a meeting of multiple supports. Which generally occurs on tighter radii but not generally in low force areas. Why so close to the presumed station area? Not trying to be an expert just trying to decode. It's the stair effect from Backlot that they finally got to work. Duh. 7 Link to comment Share on other sites More sharing options...
Jr for Birdy Posted June 8, 2013 Share Posted June 8, 2013 With a name like Big Sexy I figured you were maybe a Harley kind of guy, boy was I wrong! Perhaps you should sit in the odd number seats on DB like the ladies in my family prefer, leave those outside seats to the people who enjoy that very slight vibration. On another note, I heard some ride-ops today talking about they're hearing its an Invert, however I never made it to the dipping dots gal to confirm anything due to high pressure from a little me to hurry up we got to hit every coaster tonight! Sorry to chime in, I will grab some popcorn now too! Literally, I'm heating it now! 1 Link to comment Share on other sites More sharing options...
Paramount Posted June 8, 2013 Share Posted June 8, 2013 I've been following this thread for some time and have been going to Kings Island since I was a little guy. Matter of fact, Top Gun opened the summer I went. I miss the theming of the rides a lot and that brings me to my hopes for this current project. I'm really hoping we see a combination, dark ride/coaster. Kings Island is really lacking a quality dark ride (FOF is a great coaster but theming lacks) that it could be known for. I also think mulitple launch zones would be fun. Verbolten from Busch Gardens seems cool (I haven't been on it) but seems to be too short. A nice long indoor section with lots of cool projections and even animatronics would be good, possibly giving the ride the ability to have more trains than usual. The Incredible Hulk at Islands of Adventure is one of the best coasters I've been on and I think most of that is because of what you see after you're launched out of the tunnel. The view is simply spectacular and while it doesn't add a dark ride feature like I'm suggesting, the experience is a good composite/mix of things - tunnel/theatrics, launch, water, view. With a lot of the big giga coasters, you seem to get a lot less theming in exchange for some very generic looking aluminum tunnels to go through. Dark ride elements, trees and environment, multiple ride stages - these are all things that could really give this ride that feeling of "evil" they're promoting with the signs. Again, this is my first post but I have been reading a lot. I will honestly enjoy whatever happens but am hoping for something simply incredible and new to the thrill world. 7 Link to comment Share on other sites More sharing options...
silver2005 Posted June 8, 2013 Share Posted June 8, 2013 Could we please stop decoding each other's tastes in rides and parks and...I don't know...decode the 2014 project? 3 Link to comment Share on other sites More sharing options...
Big Sexy Posted June 8, 2013 Share Posted June 8, 2013 I just rode Intimidator at Carowinds. I noticed that there were multiple triangular supports. I know that this has been mentioned before but there are at least 5 or so and most of them are for a single support, not multiple ones like the 2014 construction is showing. Curious.... It's going to be a intamin giga watch and see. 4breast seating with lapbars. Link to comment Share on other sites More sharing options...
DarkSideOfTheMoon Posted June 8, 2013 Share Posted June 8, 2013 Here are my two cents..... What if the footers we see now going toward, say AE, then maybe the lift hill will rise until it hits by the tower gardens and the drop hill dives in the old tower gardens and another hill next to Flight of Fear and Racer!! Whoa!! Crazy idea Link to comment Share on other sites More sharing options...
Jr for Birdy Posted June 8, 2013 Share Posted June 8, 2013 Several things: A. Screamscape did NOT summarize here. Where's the giga discussion? The green INTAMIN track? The intelligent analysis? The Banshee insistence? B. Cedar Point a balanced park? No. It very much caters to the thrill seeker. That is one of many reasons Gatekeeper is such a brilliant addition for 2013. No, I won't be explaining that. I will note it had some of the shortest lines in the park last night, admittedly a small sample size. C. Bigger, BADDER. faster? Gatekeeper? That ride explains a lot. Earlier, much earlier, my philosophy of new Cedar Fair management was alluded to in a Italian Job: Stunt Coaster thread. Some, nay--most, took that too literally. Gatekeeper explains all. Look for a Gatekeeper type move at Kings Island. Mr. Ouimet has explained several times, in great detail, where Cedar Fair is headed. And it is not bigger, badder, faster. Look for a brilliant move at Kings Island. This post is not a diversion. (Hi, Mr. J!) Here is my crazy idea! Maybe we should read what Terp says over and over before we post ! Hello! He is one of few who knows, Morons! Sorry, this post is for just the Morons who post but don't know any better! I just had to comment, crawling in my shell again people, no hard feelings! Link to comment Share on other sites More sharing options...
Recommended Posts