Jump to content

Windseeker ride malfunction strands Knott's visitors


Recommended Posts

I'm concerned about how they will evacuate. It looks like they will be removing people from their seat 300' above the ground into an evac vehicle most probably hastily assembled on site.

yea that worries me as well. Unless we have people who are actively trained on extreme hight evacuation.....

Maybe just a maintence level? yeah no idea...

Link to comment
Share on other sites

How are the restraints going to unlock when the gondola is not in loading/unloading position? Will people, stunned to see they are stuck 300' in the air, willingly leave their seat unrestrained?

Every ride, has a manual release for restraints.

I would imagine that there would be some sort of harness involved.

I would think so as well.

Link to comment
Share on other sites

I'm concerned about how they will evacuate. It looks like they will be removing people from their seat 300' above the ground into an evac vehicle most probably hastily assembled on site.

I think it raises under the seats so they're in the "cage".

I believe you're right- it seems as if they'll be surrounded by the cage when they release their harness.

I have never been on this ride, and after seeing the two by two evac system, I think I'll keep onto my record.

  • Like 1
Link to comment
Share on other sites

I'm not a huge fan of this evac platform. I wonder how long it'll take to assemble and make each trip up and down.

Thinking of my restraint coming off and slipping into this evac platform 300 feet in the air doesn't sit well with me.

Would have to be faster than the current evac system...that said, if that is the best that they can come up with to help with the problem, it shows a total lack of planning from the ride manufacturer from the beginning.

I predict a very, very short lifecycle for these prototypes. Perhaps building one to start with would have been a better idea.

Shame, really.

  • Like 3
Link to comment
Share on other sites

Some of you guys are acting like the new Evac, system was just made using old stuff they had laying around. I'm sure it's perfectly safe. The only thing I'm wondering about is, if this evacuation system runs on the gondola's "track", then how will it be able to move up and down, but the gondola won't. Wouldn't it be running on the same cables/ power system?

  • Like 9
Link to comment
Share on other sites

I was wondering the same thing. I assume it has it own drive/power source.

My concern is the whole process seems half @$$ed. It seems odd to picture them getting that thing out, assembling it, and sending it up and down the tower while riders are stranded. Then there's questions of how long do they wait until they decide to get it out?

  • Like 1
Link to comment
Share on other sites

I'm concerned about how they will evacuate. It looks like they will be removing people from their seat 300' above the ground into an evac vehicle most probably hastily assembled on site.

I think it raises under the seats so they're in the "cage".
Indeed:

398875_560900513961682_1667599001_n.jpg

It also looks to have some kind of drive system on it:

486050_561019217283145_401114017_n.jpg

  • Like 2
Link to comment
Share on other sites

This is from the Knott's Network FB page. This quote most probably explains how the evacuation vehicle will move up and down the tower.

From what it looks like and watching them for a few weeks is it looks like they added a bypass lift that will allow the, to bring the ride down when there's a problem. Now I don't know but I see new stuff on the top and they added extra cables and different pulleys.

I also found this Youtube video of maintenance raising, lowering, and "bouncing" the vehicle.

  • Like 2
Link to comment
Share on other sites

Stupid, stupid, stupid. I dont under stand why they just can't use the motors to raise or lower it.

Ummm... What if the motor is the problem with the ride? Or there's a prolonged power outage? Or something is wrong with one of the cables? Using the motor to raise & lower the gondola wouldn't be a possibility in those scenarios.

Or maybe I'm confused as to what you meant...

Link to comment
Share on other sites

I had heard at one point that there was a crane that would assist in evacuating riders if they had been stranded like they would have been at Knott's Berry Farm. Along with that, I see in my mind the pictures of the evacuation from the Sky Ride at KI and see that type of "rescue." However, I had heard that the crane that was to be used to evacuate was located near Akron! About a 3-3.5 hr drive to get it to KI before it could be used to evacuate. Whether or not that all is true, is a different story. But I believe this is the worst case scenario now for evacuation of the riders.

I had a friend say that it seemed like the parks are just accepting this, this backup system to evacuate riders.I replied with the following:

It's perceived that they're accepting this. What we don't see is what's going on between Cedar Fair and Mondial. Cedar Fair may be disputing the contracts. Cedar Fair may be telling Mondial, you fix the issues we'veencountered, you provide a way for the riders to be evacuated if need be
or we sue. Or something like that.


I do find it funny that many are going off and saying Mondial is idiotic for this system and what not. But again, we've only seen this little tid bit of information. What no one has shared here is a photo from Knott's Network showing a motor that was going to be installed. What could that be for? It could be for this system and it could also be for a backup motor to bring the gondola's down. What we've seen is on the outside of the towers, we're not seeing what changes they've made (if any) on the inside.
I believe with the ultimate shut down of the rides this past season, sent a strong message to both Mondial and the consumers. To Mondial - we need this fixed or we won't operate your ride, it'll be perceived as Mondial rides aren't reliable throughout the industry if they're having these problems that need fixed, and until these problems are fixed the rides will remain closed. To the consumers - we will not open this ride until we know it is absolutely safe and if a problem should arise, we can evacuate you safely.

I was wondering the same thing. I assume it has it own drive/power source.

My concern is the whole process seems half @$$ed. It seems odd to picture them getting that thing out, assembling it, and sending it up and down the tower while riders are stranded. Then there's questions of how long do they wait until they decide to get it out?


From pictures that Knott's Network has posted, I'm assuming that it will have it's own drive/power source. I'm pretty sure they have to determine that there is absolutely no way for the Gondola to come down with the riders on it in a safe and quick fashion. I'd assume that the maintenance workers would have to run a diagnostic test on the ride's computer system to see if they can override the e-stop. If not, they'd have to determine if they can manually lower the gondola. If not, then they'd bring this system out.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...