PatchesC Posted January 28, 2020 Share Posted January 28, 2020 47 minutes ago, Enchanted Voyage Lover said: Welded nuts on the base is the best Loctite you can buy. I'd go with 263 lol 1 Link to comment Share on other sites More sharing options...
Buckeye27 Posted January 28, 2020 Share Posted January 28, 2020 23 minutes ago, Waltny said: I though it was track also and raced over here to find this... Well they are actually removing the temporary supports from the lift now 2 Link to comment Share on other sites More sharing options...
Waltny Posted January 28, 2020 Share Posted January 28, 2020 11 hours ago, Buckeye27 said: Well they are actually removing the temporary supports from the lift now Well, that is what the picture shows. 1 Link to comment Share on other sites More sharing options...
Waltny Posted January 28, 2020 Share Posted January 28, 2020 5 minutes ago, TheFloppyDisc said: It's going up now! I got it. There is a support hidden back there it’s resting on but they had to lift this piece over the currently large support so it came up over the trees. 2 Link to comment Share on other sites More sharing options...
KIguy2004 Posted January 28, 2020 Share Posted January 28, 2020 15 minutes ago, Waltny said: I got it. There is a support hidden back there it’s resting on but they had to lift this piece over the currently large support so it came up over the trees. Can we get a photo 18 minutes ago, Buckeye27 said: Well they are actually removing the temporary supports from the lift now What do the temporary supports do? 1 Link to comment Share on other sites More sharing options...
KingsMills79 Posted January 28, 2020 Share Posted January 28, 2020 It ceases to amaze me how dark it is on the webcam. Like the track that they are currently installing is blending in with the tree line SO much that it is impossible to see the actual track piece being attached. Very frustrating 1 Link to comment Share on other sites More sharing options...
TheFloppyDisc Posted January 28, 2020 Share Posted January 28, 2020 Just now, KingsMills79 said: It ceases to amaze me how dark it is on the webcam. Like the track that they are currently installing is blending in with the tree line SO much that it is impossible to see the actual track piece being attached. Very frustrating I noticed that too lol, but hey I'll take a cam over no cam any day. 1 Link to comment Share on other sites More sharing options...
KIguy2004 Posted January 28, 2020 Share Posted January 28, 2020 4 minutes ago, TheFloppyDisc said: I noticed that too lol, but hey I'll take a cam over no cam any day. Do you think Kings Island will turn off the cam when Orion starts testing? 1 Link to comment Share on other sites More sharing options...
TheFloppyDisc Posted January 28, 2020 Share Posted January 28, 2020 1 minute ago, KIguy2004 said: Do you think Kings Island will turn off the cam when Orion starts testing? Someone else might have a better answer to this since I wasn't here for Banshee or MT construction, but from looking back at those threads I believe the camera was left on during testing for both those rides. I would imagine they would do the same for Orion. 1 Link to comment Share on other sites More sharing options...
BBN Posted January 28, 2020 Share Posted January 28, 2020 4 minutes ago, KIguy2004 said: Do you think Kings Island will turn off the cam when Orion starts testing? Most definitely 2 1 Link to comment Share on other sites More sharing options...
IndyGuy4KI Posted January 28, 2020 Author Share Posted January 28, 2020 4 minutes ago, KIguy2004 said: Do you think Kings Island will turn off the cam when Orion starts testing? If history is an indicator from DB, Banshee, and MT then yes. 3 1 Link to comment Share on other sites More sharing options...
RedSummit20 Posted January 28, 2020 Share Posted January 28, 2020 Just now, IndyGuy4KI said: If history is an indicator from DB, Banshee, and MT then yes. Nothing from stopping us to go up there and record behind Great Wolf though! 4 Link to comment Share on other sites More sharing options...
Waltny Posted January 28, 2020 Share Posted January 28, 2020 1 minute ago, IndyGuy4KI said: If history is an indicator from DB, Banshee, and MT then yes. It’s going to take a lot of skill and luck to capture it from the outside then, doesn’t mean it won’t be impossible. 2 Link to comment Share on other sites More sharing options...
IndyGuy4KI Posted January 28, 2020 Author Share Posted January 28, 2020 5 minutes ago, Ohio Coaster Boy 19 said: Nothing from stopping us to go up there and record behind Great Wolf though! Once they get some cycles in, they will turn them back on. It is not like they will be off until opening day. 5 Link to comment Share on other sites More sharing options...
TheFloppyDisc Posted January 28, 2020 Share Posted January 28, 2020 3 minutes ago, IndyGuy4KI said: Once they get some cycles in, they will turn them back on. It is not like they will be off until opening day. Was the camera down for just a couple of hours or a couple of days? 1 Link to comment Share on other sites More sharing options...
Waltny Posted January 28, 2020 Share Posted January 28, 2020 28 minutes ago, KIguy2004 said: Can we get a photo What do the temporary supports do? I was going to lump it into the next update, but if is what the people want. 2 1 Link to comment Share on other sites More sharing options...
medford Posted January 28, 2020 Share Posted January 28, 2020 The cameras will be turned off during testing, at least if the past is any indication, but it will be possible to watch and spot from different areas, however impossible to see it all unless you've got an eye in the sky. however, once testing is complete, the cameras will come back up and you'll be able to watch it undergo some cycling prior to opening up for the public. 1 Link to comment Share on other sites More sharing options...
RedSummit20 Posted January 28, 2020 Share Posted January 28, 2020 11 minutes ago, IndyGuy4KI said: Once they get some cycles in, they will turn them back on. It is not like they will be off until opening day. yeah true. i see people go up there all the time and take photos and videos ive never been up there though. 1 Link to comment Share on other sites More sharing options...
hotrodyoda Posted January 28, 2020 Share Posted January 28, 2020 They just lowered the 2nd temporary support, and the lift didn't fall over. Thank goodness! 1 4 Link to comment Share on other sites More sharing options...
McSalsa Posted January 28, 2020 Share Posted January 28, 2020 I don't remember if the cameras went down during Mystic Timbers testing, but I do remember vividly watching it do test runs before the ride opened as I remember seeing how fast the ride was going over the 2nd hill and being impressed at the speed. So the cameras did come back up for Mystic Timbers before opening day, if they did go down. The park also put this video out after the 1st test run was done for Mystic Timbers, and I imagine Orion will get a similar video: 4 Link to comment Share on other sites More sharing options...
JonahWilliamson Posted January 28, 2020 Share Posted January 28, 2020 First test is always recorded but never streamed. The first run is incredibly slow as the cold, soft wheels are ran on it and chance of valleys are higher. So the video will probs get posted but our time of Orion cam down isnt quite finished yet. 3 Link to comment Share on other sites More sharing options...
Beast Night Rider Posted January 28, 2020 Share Posted January 28, 2020 1 hour ago, hotrodyoda said: They just lowered the 2nd temporary support, and the lift didn't fall over. Thank goodness! This may be a dumb question but does anyone know why they remove the temporary lift hill supports? Why not leave them in place? Link to comment Share on other sites More sharing options...
Legofan237 Posted January 28, 2020 Share Posted January 28, 2020 3 minutes ago, Beast Night Rider said: This may be a dumb question but does anyone know why they remove the temporary lift hill supports? Why not leave them in place? To help keep the supports in place? 1 Link to comment Share on other sites More sharing options...
MrSourNinja Posted January 28, 2020 Share Posted January 28, 2020 3 minutes ago, Legofan237 said: To help keep the supports in place?no 7 minutes ago, Beast Night Rider said: This may be a dumb question but does anyone know why they remove the temporary lift hill supports? Why not leave them in place? I’m sure it’s a looks thing. They don’t need them anymore and it looks more elegant without them. 1 Link to comment Share on other sites More sharing options...
JonahWilliamson Posted January 28, 2020 Share Posted January 28, 2020 7 minutes ago, Beast Night Rider said: This may be a dumb question but does anyone know why they remove the temporary lift hill supports? Why not leave them in place? When the remainder of they layout is put in, the coaster essentially leans on itself. Those supports were up to spread out the pressure on the spine, now that the other track and supports are up the pressure and weight is more evenly spread out 3 1 Link to comment Share on other sites More sharing options...
flightoffear1996 Posted January 28, 2020 Share Posted January 28, 2020 19 minutes ago, JonahWilliamson said: When the remainder of they layout is put in, the coaster essentially leans on itself. Those supports were up to spread out the pressure on the spine, now that the other track and supports are up the pressure and weight is more evenly spread out But where to the temporary supports go? If you paid for them you might as well keep them 1 Link to comment Share on other sites More sharing options...
JonahWilliamson Posted January 28, 2020 Share Posted January 28, 2020 11 minutes ago, flightoffear1996 said: But where to the temporary supports go? If you paid for them you might as well keep them Thats a great question. Im not sure in all honesty. But if B&M were really smart about it, the bolt fittings, should be universal and fit all gigas and maybe they can use them on the other gigas. The only problem is the distance between the spine and supports might be different. So Im not sure. Maybe they are thrown back in to the big lava pot at Clermont steel and melted back down who knows. 1 Link to comment Share on other sites More sharing options...
BeeastFarmer Posted January 28, 2020 Share Posted January 28, 2020 I don't think it works like that. I think KI is its' own general contractor and they hire out different phases of the project. B&M designs to spec, Skyline (or whatever the name of the company is) handles the erection (and probably subs out electrical, mechanical, plumbing, etc), KI brings in ride control systems engineers, landscape companies and thematic companies. I used to think B&M would just be paid 30 million for a GiGa and the park just gave them a key to the gate, but I no longer think that way. 1 Link to comment Share on other sites More sharing options...
medford Posted January 28, 2020 Share Posted January 28, 2020 I think the idea is, on the chase there is a major catastrophe or dummies start flying off the ride, they don't want the web cams on so that everyone can record it. Once they get the first wave of testing done and confident everything is "as should be' they'll turn them back on. I believe each ride has to cycle a specific number of times before human can jump on, so there will be a number of cycles over several weeks to get the ride to that point. 2 Link to comment Share on other sites More sharing options...
flightoffear1996 Posted January 28, 2020 Share Posted January 28, 2020 43 minutes ago, medford said: I think the idea is, on the chase there is a major catastrophe or dummies start flying off the ride, they don't want the web cams on so that everyone can record it. Once they get the first wave of testing done and confident everything is "as should be' they'll turn them back on. I believe each ride has to cycle a specific number of times before human can jump on, so there will be a number of cycles over several weeks to get the ride to that point. I believe it is 5,000 cycles in a row without a fault. 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts