flightoffear1996 Posted January 28, 2020 Share Posted January 28, 2020 Just now, flightoffear1996 said: I believe it is 5,000 cycles in a row with our a fault. Link to comment Share on other sites More sharing options...
Cedar Fair Fanboy Posted January 28, 2020 Share Posted January 28, 2020 It's time for the trick track to be built. Link to comment Share on other sites More sharing options...
Enchanted Voyage Lover Posted January 28, 2020 Share Posted January 28, 2020 42 minutes ago, medford said: I believe each ride has to cycle a specific number of times before human can jump on, so there will be a number of cycles over several weeks to get the ride to that point. It was mentioned before that each train must do 500 runs without any issues. If it does, they must start over. 1 Link to comment Share on other sites More sharing options...
thatguyfromohio Posted January 28, 2020 Share Posted January 28, 2020 This may be a dumb question but does anyone know why they remove the temporary lift hill supports? Why not leave them in place? Because the track needs to be able to flex, watch Diamondback drop, it will flex back and forth. Watch steel vengeance, that flexes almost a foot sometimes Sent from my iPhone using Tapatalk 3 Link to comment Share on other sites More sharing options...
LovinMeSomeBanshee Posted January 28, 2020 Share Posted January 28, 2020 More track going up. 2 Link to comment Share on other sites More sharing options...
King Ding Dong Posted January 28, 2020 Share Posted January 28, 2020 40 minutes ago, thatguyfromohio said: Because the track needs to be able to flex, watch Diamondback drop, it will flex back and forth. Watch steel vengeance, that flexes almost a foot sometimes Time for The Rattler video, it starts getting good about half way. 2 4 1 Link to comment Share on other sites More sharing options...
Beast Night Rider Posted January 28, 2020 Share Posted January 28, 2020 41 minutes ago, King Ding Dong said: Time for The Rattler video, it starts getting good about half way. I wasn’t sure what I was watching at first but you can really see the track moving hallway through, like you said. That is crazy! It’s almost like suspensions for the coaster cars. Never seen a track move that much before, thanks for sharing. 1 Link to comment Share on other sites More sharing options...
PilotDude Posted January 28, 2020 Share Posted January 28, 2020 1 hour ago, Enchanted Voyage Lover said: It was mentioned before that each train must do 500 runs without any issues. If it does, they must start over. 1 hour ago, flightoffear1996 said: 1 hour ago, flightoffear1996 said: I believe it is 5,000 cycles in a row without a fault. From my experience working around roller coasters during their construction and testing, while I was not "on the crew" building the ride and I can't publicly talk about my actual job due to non-disclosures but you can think of it someone hired to protect to customers interest with regulatory compliance and safety, none of these numbers are even remotely close to real world. Granted each ride is different and both the state and manufacturer have ride testing requirements(insurance as well but are mostly identical to the manufacturers) and I have not seen the documentation for Orion, but I would be shocked if they had this requirement. In this day and age, testing is data driven not brute force driven. Rides are tested with sensors and that data is used to verify if the ride is safe. Think G force, speed, deflection, vibration, etc. vs well it went around 500 times and therefore it is safe. B&M has designed a testing protocol that will be followed to a T, and they will be part of the testing, they will want to test under different conditions, such as weight of the train, wheel configuration, ambient temp, dry/wet, single vs multi train operation, and many many other variables. While it is possible the coaster may hit 500 cycles or even 5000 or could be as little as 50 before the testing phase is over, there is no single number on dispatch a train X number of times and your good to open. They will spend days opening and closing the station gates, putting trains on the track and then away all while them never making a circuit. Roller coaster testing is a serious business. 8 Link to comment Share on other sites More sharing options...
FoF96" Posted January 28, 2020 Share Posted January 28, 2020 2 hours ago, Enchanted Voyage Lover said: It was mentioned before that each train must do 500 runs without any issues. If it does, they must start over. Yes this is partly true. When I worked at KK, and Lightning Run was new. I remember staying past midnight just to run that thing through cycles don’t know about a specific number but it as constantly moving for hours. 1 Link to comment Share on other sites More sharing options...
PatchesC Posted January 28, 2020 Share Posted January 28, 2020 1 hour ago, PilotDude said: From my experience working around roller coasters during their construction and testing, while I was not "on the crew" building the ride and I can't publicly talk about my actual job due to non-disclosures but you can think of it someone hired to protect to customers interest with regulatory compliance and safety, none of these numbers are even remotely close to real world. Granted each ride is different and both the state and manufacturer have ride testing requirements(insurance as well but are mostly identical to the manufacturers) and I have not seen the documentation for Orion, but I would be shocked if they had this requirement. In this day and age, testing is data driven not brute force driven. Rides are tested with sensors and that data is used to verify if the ride is safe. Think G force, speed, deflection, vibration, etc. vs well it went around 500 times and therefore it is safe. B&M has designed a testing protocol that will be followed to a T, and they will be part of the testing, they will want to test under different conditions, such as weight of the train, wheel configuration, ambient temp, dry/wet, single vs multi train operation, and many many other variables. While it is possible the coaster may hit 500 cycles or even 5000 or could be as little as 50 before the testing phase is over, there is no single number on dispatch a train X number of times and your good to open. They will spend days opening and closing the station gates, putting trains on the track and then away all while them never making a circuit. Roller coaster testing is a serious business. This is a podcast Chad had shared on Twitter with KI employees, which is where the uninterrupted cycle requirement has come from. http://www.coasterradio.com/episodes/1401.html#t=44:47 Link to comment Share on other sites More sharing options...
PilotDude Posted January 29, 2020 Share Posted January 29, 2020 1 hour ago, FoF96" said: Yes this is partly true. When I worked at KK, and Lightning Run was new. I remember staying past midnight just to run that thing through cycles don’t know about a specific number but it as constantly moving for hours. This sounds more like a break in or training then a certification. While I have operated roller coasters I have never been certified for any given coaster so I am unsure of KK or CF rules for non-maintenance coaster training. In other coasters I have worked around, both B&M and other companies, the manufacturer did all of the certification operation as they owned and insured the coaster until it passed its certification. This is a really complicated area to discuss though as each ride, insurance and state has its own requirements. But from my experience it was a let B&M break it so they have to fix it, they certify it as working then park maintenance goes through a training period where they can operate it, then general park staff. The first several dozen? runs of each train are going to have issues. Each issues will be tiny, something as simple as a sensor moved just enough to no longer sense the lap bar position. It isn't uncommon for to have a test run, manufacturer techs climb all over the train and coaster for a couple hours, dispatch again and repeat. On any given day a certificated coaster wont complete 500 dispatches with out an error. Most of them are so minor it "fixes itself" with the computer re-polling a sensor/ sensor group but the computer still logs an error that maintenance can check the log for. 3 Link to comment Share on other sites More sharing options...
Waltny Posted January 29, 2020 Share Posted January 29, 2020 18 hours ago, JonahWilliamson said: Thats a great question. Im not sure in all honesty. But if B&M were really smart about it, the bolt fittings, should be universal and fit all gigas and maybe they can use them on the other gigas. The only problem is the distance between the spine and supports might be different. So Im not sure. Maybe they are thrown back in to the big lava pot at Clermont steel and melted back down who knows. Ill see if I can zoom in enough on some of my current shots to show where it was bolted into the the spine. Well, after zooming in on those temp supports on can see they are beat up a bit and look to be a pressfit? All images are deep crops on existing photos I’ve taken. 2 1 Link to comment Share on other sites More sharing options...
calakapepe Posted January 29, 2020 Share Posted January 29, 2020 Glad we won't be getting any more false alarms that they were removing the temporary supports XD 3 3 Link to comment Share on other sites More sharing options...
Born_in_'72 Posted January 29, 2020 Share Posted January 29, 2020 More track going in!!! 4 Link to comment Share on other sites More sharing options...
Waltny Posted January 29, 2020 Share Posted January 29, 2020 Here was yesterday’s action should anyone want to catch up. After I finally get the children off to school I’ll swing by, get the next piece and check on Vortex 4 2 Link to comment Share on other sites More sharing options...
collin.klopfstein Posted January 29, 2020 Share Posted January 29, 2020 Is there a chance track work is finished today? 3 Link to comment Share on other sites More sharing options...
LovinMeSomeBanshee Posted January 29, 2020 Share Posted January 29, 2020 1 minute ago, collin.klopfstein said: Is there a chance track work is finished today? I'm sure there's a chance. I think they wrap it up tomorrow. 3 Link to comment Share on other sites More sharing options...
Born_in_'72 Posted January 29, 2020 Share Posted January 29, 2020 ...and the next piece. They are moving today!!! 4 Link to comment Share on other sites More sharing options...
flightoffear1996 Posted January 29, 2020 Share Posted January 29, 2020 How many pieces are left? Almost done with track work! 2 Link to comment Share on other sites More sharing options...
mikejenkins1 Posted January 29, 2020 Share Posted January 29, 2020 18 minutes ago, Born_in_'72 said: ...and the next piece. They are moving today!!! It looks like 4 more pieces of track and 1 support.... 1 Link to comment Share on other sites More sharing options...
Born_in_'72 Posted January 29, 2020 Share Posted January 29, 2020 3 minutes ago, mikejenkins1 said: It looks like 4 more pieces of track and 1 support.... And the one support is already assembled. It's just laying on it's side.... 3 Link to comment Share on other sites More sharing options...
BBN Posted January 29, 2020 Share Posted January 29, 2020 Good chance it's done today the rate their moving 1 Link to comment Share on other sites More sharing options...
Waltny Posted January 29, 2020 Share Posted January 29, 2020 They made quick work of the wave hill and I think 4 pieces went up in 3 hours or so on it. They had staged all the pieces yesterday so they could toss it up today. Here is my view 9 1 Link to comment Share on other sites More sharing options...
hotrodyoda Posted January 29, 2020 Share Posted January 29, 2020 I imagine they could blow through the last of this track work quickly today. It's all in a straight line, and there's not any extra support or track to maneuver around. 3 Link to comment Share on other sites More sharing options...
ThrillKingsFitzy Posted January 29, 2020 Share Posted January 29, 2020 On 1/27/2020 at 1:55 PM, Ohio Coaster Boy 19 said: He does it to me all the time. ? Not a grammer person as you can see by not really spelling grammer right. Anyways, about two or three more pieces and we're almost done! Link to comment Share on other sites More sharing options...
collin.klopfstein Posted January 29, 2020 Share Posted January 29, 2020 Another piece is being put into place 6 Link to comment Share on other sites More sharing options...
LovinMeSomeBanshee Posted January 29, 2020 Share Posted January 29, 2020 Man this is exciting. Almost down to the end, guys! 2 Link to comment Share on other sites More sharing options...
Nutterie Posted January 29, 2020 Share Posted January 29, 2020 theres no doubt in my mind that the track gets done todaySent from my SM-N960U using Tapatalk 1 Link to comment Share on other sites More sharing options...
JonahWilliamson Posted January 29, 2020 Share Posted January 29, 2020 From the speculation to #KIWebCamBlackout to finished track....what a KIC off season 2 Link to comment Share on other sites More sharing options...
Maverick44 Posted January 29, 2020 Share Posted January 29, 2020 Sorry i have missed so much the past few days. Was doing a move at work and had no time lol I think we see the track work done TODAY!!! 5 Link to comment Share on other sites More sharing options...
Recommended Posts